Bell Kc7 Cmr Carbon

Kc7 Cmr Carbon

CMR 2016

(cod.120500) € 950,00 + tax

Cutting-edge design developed from the new Hp7 model but adapted for specific use for children and teenagers under fifteen. The Kc7-Cmr Carbon Helmet is particularly light (1095 g in Sizes 54 up to 56 and 1130 g in Sizes 57 up to 59 (+/- 3%) and is specifically designed for children and teenagers. The Helmets with CMR homologation are strongly recommended for all kart drivers and are mandatory from 01/01/2010 for all drivers under 15 years old.
Also available in the special edition Lewis Hamilton, or White, and in the new colours: Champion Blue, Champion Pink, Champion Orange e Champion Green.
(Available till stocks last Venom Green, Venom Orange, Venom Yellow.)

Order

Ultra-lightweight Premium Carbon Composite shell: 1,095g in sizes 54 to 56 and 1,130g in sizes 57 to 59 (+ or - 3%)
Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance
Optical grade injected Double Screen Anti-Fog (DSAF) 2MM visor for anti-fog control and superior visibility
Powerful and effective top and chin bar ventilation system with 14 air intake and extraction channels for maximum ventilation
Air intake system includes two-part centre and side air intakes (installed)
Shell and shield design optimized to improve aerodynamic performance, reduce internal noise and enhance energy management capacities
Rear spoiler available separately
KC7 Carbon is NOT compatible with FHR anchor systems or devices
Synthetic rubber gasket seal to prevent dirt and water from entering the helmet
Shield and pivot kit: SE07 2MM, SV(SE07) (This shield only fit the KC7 Range)
Interior: Non-fireproof lining for extra durability
Black High Strength – High Comfort Fabric and synthetic leather
Alternative interior fabric colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (by special order).
Color: Carbon, Gloss finish
Sizes: 54-55-56-57-58-59
Homologation: SNELL-FIA CMR-2016

Description Kart Helmets

The Bell Helmets Series dedicated to Karting offers excellent value for money: lightweight composite shells, perfect fit, contemporary design and style, excellent ventilation and unbeatable prices. The Rs7k and Rs7k Carbon models are recommended: for adults. The KC7 - CMR models are certified with the new CMH standard, jointly developed by the FIA Institute and the Snell Memorial Foundation. This standard was developed to create safer and lighter helmets for karting use for kids under 15. According to CIK regulations, Helmets with Snell-FIA CMH (CMR) standard can be used by all drivers in karting. These Helmets are strongly recommended for all kart drivers and are mandatory from 01/01/2010 for drivers under 15 years old.

Extra Images

Sizing

Optimal fit is essential for all helmets and even more so for Competition helmets. Competition Market is an expert dealer who can help you determine the right helmet for you, for safety, fit and comfort. Tips for determining optimal fit:

MEASUREMENT

TRY ON

HORIZONTAL AND VERTICAL MOVEMENT CHECK

RETENTION CHECK

PRESSURE POINT CHECK

1.MEASUREMENT.
Measuring the head is a starting point for the entire sizing procedure. Due to varying shapes, heads that are apparently the same size when measured by a tape may not necessarily fit the same size helmet. The circumference of the head should be measured at a point approximately two centimeters above the eyebrows in front and at a point in the back of the head that results in the largest possible measurement. Take several measurements to make sure you have the largest one.

2.TRY ON.
Once you have determined your preliminary tape measurement, select the helmet that is closest in hat size to the tape measurement and try on the helmet. If it is between sizes, round up to the next largest one. The correct procedure to put on the helmet is:

1. Grasp the helmet by the chin straps, with the front of the helmet towards you and the top of the helmet facing down.

2. Place the thumbs on the inside surface of the straps and balance the helmet with the index fingers.

3. Spread the helmet apart with the hands, and slip down over the head.

If the helmet slides down on the head with no resistance, you have your first indication that it may be too large. Obviously, if it will not slide down over the head at all it is too small. Many people unfamiliar with helmets are reluctant to pull down if they meet resistance as the helmet goes on, however if it is just snug going on, we recommend to get the helmet on. Only if the helmet is impossible to put on should you move up to the next size, as helmets that go on snug generally fit very well once all the way on. It is a fact that most people will select a helmet that is too large for them, if left to make their own choice. The eyes should be approximately in the center of the eye port with the top edge of the liner padding just above the eyebrows.

3.HORIZONTAL AND VERTICAL MOVEMENT CHECK

Once you are
wearing the helmet, you should look carefully at the way it fits. Check to see
if the cheek pads are in contact with the cheeks. Is there excess pressure on
the cheeks? Look for gaps between the temples and the brow pad. Check the back
of the helmet where the neck roll (if the helmet has one) makes contact with the
neck. Does it touch at all? Or is it pushing the helmet away at the rear causing
it to roll down over the eyes in front. After you have made your visual check,
grab the helmet in your hands - one on either side - and while holding your head
steady try to rotate the helmet from side to side. Note any movement of the skin
while doing this, as well as the amount of resistance to movement. Next, check
movement up and down, again noting skin movement and resistance. If in either
test there was little or no skin movement, and/or the helmet moved very easily,
the helmet is too large. A properly fitted helmet will cause the skin to move as
the helmet moves. And, it will feel to the wearer as if evenly distributed
pressure is being continuously exerted around the head.

NOTE: Helmets are a little like shoes, in that they do break-in a little. For this reason the best attitude to have when fitting is that the helmet should be as tight as you can stand to wear it.

4.RETENTION CHECK
This test may be a little uncomfortable, but it is very important to check. Fasten the chin strap tightly fastened, hold your head steady, and grab the rear bottom edge with your fingers. Then try to roll the helmet off your head. If it comes off, it is undoubtedly too large. WARNING: Do not buy a helmet that can be rolled off the head with the strap fastened.

5.PRESSURE POINT CHECK
Finally, unfasten the chin strap and remove the helmet. Immediately after the helmet has been removed, observe coloration of the skin of the forehead and cheeks. A reddening of the skin in a small area may indicate a pressure point. Pressure points sometimes are not noticed by the wearer for several minutes, or even hours later. They sometimes cause headaches, and are at the least, uncomfortable. If you notice a pressure point, but cannot remember experiencing discomfort there while wearing the helmet, put the helmet back on for a few minutes, paying particular attention to the anticipated pressure point. If you experience complains of pressure point discomfort either time, go to the next larger size, repeating steps four and five.

CONFIRM PROPER FIT.
The best way to evaluate proper fit is to try on helmets that are one size larger and one size smaller than the one you think is right.

Bell Kc7 Cmr Carbon

Kc7 Cmr Carbon

Recommended: